Hydrocoat Antifouling Paint, Black, Gallon 1184006

Description

Hydrocoat Antifouling Paint, Black, Gallon 1184006
Description
Hydrocoat’s environmentally-friendly, water-based formula offers exceptional protection against all types of marine fouling organisms.
Lacking the noxious solvents found in most bottom paints, Hydrocoat easier to apply and clean up, with no heavy solvent smell. It is also easy on the environment—and easy on the person who applies it. The water-based formula exceeds even the most stringent air pollution standards for VOCs.
Hydrocoat’s ablative surface wears away with use, exposing fresh biocides while minimizing paint build-up and the need for sanding when the time comes to repaint.
Hydrocoat withstands frequent trailering, beaching, and launching. And with a formula that allows unlimited dry time to launch, you can paint in the fall and splash in the spring.
Key Features
Offers outstanding protection against all types of marine fouling
Contains drag reducing PTFE
Finish can be burnished to reduce drag
Allows unlimited dry time to launch
Reduces the need for sanding at haulout
Cleans up easily with soap and water
Easy on the environment and the person who applies it
Physical Data
Vehicle type:
Water-based Emulsion
Finish:
Flat
Available colors:
Blue, Green, Red, Black
Components:
1
Curing mechanism:
Solvent release
Solids by weight:
(Theoretical): 73 +/- 2%
Solids by Volume:
(Theoretical): 40 +/- 2%
Coverage:
430sq.ft. /gal.
VOC:
150 grams/liter (Max)
Active ingredients:
40.43% Cuprous oxide
Flash point:
None
Application
Application Method:
Brush, roller, airless, or conventional spray
Number of coats recommended:
2 Minimum with additional coats at waterline recommended.
Dry Film Thickness:
1.5 mils (3.75 wet mils)
Applicator:
High-quality short nap roller (maximum 3/16” nap)
Application temperature:
Min. /Max. Range: 50° F. Min/90°F. Max
Thinner:
Water