Interlux Y4241QT Brightside Polyurethane Paint - Sapphire Blue , Quart

Description

Get the look of a two-part polyurethane with the application ease of a standard enamel.
An uncomplicated alternative to two-part paints, Brightside® is a hard, high-gloss, one-part polyurethane topside finish with excellent abrasion and chemical resistance. It is easy to apply and has a self-leveling formula that with the right technique (roll and tip) renders results that approximate the “sprayed-on” look of two-part finishes.
Brightside contains fluoro-micro additives which resist staining, add to abrasion resistance and make it easy to clean. It also boasts UV stabilizers that help to maintain gloss and color retention. Available in a range of bright, crisp colors. Brightside is for use above the waterline only.
Key Features
Easy-to-apply alternative to two-part finishes
UV stabilizers add to durability
Fluoro-micro additives resist staining
Excellent abrasion and chemical resistance
Physical Data
Base formulation:
One-part polyurethane
Finish:
High Gloss
Coverage:
Brush: 137sq.ft./qt. 550sq.ft./gal.; Spray: 110sq.ft./qt.; 440sq.ft./gal.
Volume Solids:
45%
VOC:
457g/lit. (As supplied)
Application
Application Method:
Brush, roller, airless, or conventional spray
Number of coats recommended:
2-3 minimum Bare Wood: 3 coats (first thinned)
Recommended DFT/coat:
1.2 mils dry
Application temperature:
Min./Max. Range: 5°C/41°F and maximum 35°C/95°F.
Primer needed:
Pre-Kote® Primer, Model 492876
Thinner:
216, Model 117598 or 333, Model 198374
Drying Times
Drying
@50°F
@73°F
@95°F
To touch
3 hr.
2 hr.
1 hr.
To recoat
16 hr.
12 hr.
8 hr.
Get the right amount of paint:
The following recommendations are for two coats of paint, all values are approximate.
Boat Type
Topside
10' Dinghy
1 qt.
14' Outboard
1 qt.
18' Runabout
2 qt.
20' Sailboat
2 qt.
24' Runabout
2 qt.
30' Sailboat
1 gal.
32' Cruiser
1 gal.
36' Auxiliary
2 gal.
40' Cruiser
2 1/2gal.
45' Sailboat
3 gal.
50' Sportfisher
3 gal.