Pettit Odyssey HD Ablative Antifouling Blue Bottom Paint - Gallon 1207G

Description

Other
Pettit Odyssey HD Ablative Antifouling Blue Bottom Paint - Gallon 1207G
Product SKU:
PET-1207G
Item Condition:
New
MSRP
4.49
Sale Price
6.99
Product Description:
Pettit Odyssey HD Ablative Antifouling Bottom Paint
Pettit Odyssey HD Bottom Paint is a multi-season antifouling paint that combines controlled polishing ablative technology with a high copper content. Odyssey HD provides a paint film strong enough to handle tough fouling waters from coast to coast. This bottom paint is 50 state VOC-compliant and will not build up over time, leaving running surfaces smooth and clean. Odyssey HD's copolymer resins withstand hauling and relaunching without losing effectiveness for both power and sailboats. Additionally, Odyssey is fast-drying and provides multi-season protection.
Pettit Odyssey HD provides excellent antifouling protection and is backed by the industry's strongest limited warranty. The Hull Defense 18 Month Limited Warranty offers peace of mind to every boater. Odyssey HD offers the most dependable and trusted antifouling paint in the industry.
Features:
Multi-season protection
Fast dry, VOC-compliant for boatyards
High-copper ablative protection in all waters
Smooth polishing finish prevents buildup and sanding
Compatible over most bottom paints
Covered by HD (Hull Defense) 18 month limited warranty
Specifications:
Pack Size: 1 US Gallon
Type: Copper-based ablative
Recommended Usage: All fouling waters
Colors Available: 1207 Blue, 1807 Black
Drying Time: To overcoat 3hrs; To launch; 10hrs. @ 70°F
Number of Coats Recommended: 2
Coverage: 475 ft2/gal
VOC: 330 grams/liter
Biocide: Cuprous Oxide 45.7%
Associated Products:
Pettit Protect Epoxy Primer
- Primer for bare fiberglass applications
Pettit 120 Thinner
- For surface prep
How to Apply Pettit Odyssey HD Bottom Paint
Odyssey HD is easily applied by brush, roller, or spray. When rolling, use only a high-quality roller cover. Prior to application, it is necessary to thoroughly mix the paint before using. Odyssey HD contains cuprous oxide, so there is a tendency for settling to occur. Shake the can of paint on a mechanical paint shaker, a wooden paddle, or an electric drill mixer. Before using, check the sides and bottom of can to ensure all the pigment has been mixed in. Adhere to all application instructions to obtain optimum performance. If spraying, make sure not to thin more than 10% or inadequate paint film thickness will occur.
Application Methods:
Brush, roller, airless or conventional spray
Number of Coats:
2
Dry Film Thickness:
1.6 mils (3.2 wet mils)
Coverage:
475 sq. ft/gal.
Application Temp:
50°F Min. / 90°F Max.
Thinner:
120 Brushing Thinner or 121 Spraying Thinner
DRY TIMES:
Temp
To Touch
To Recoat
To Launch
90°F
1/4 HR
1-1/2 HR
6 HR
70°F
1/2 HR
3 HR
10 HR
50°F
1 HR
6 HR
16 HR
Application Systems
Previously Painted Surfaces
To paint old hard and ablative bottom paints, thoroughly wipe down the surface with 120 Brushing Thinner.
Sand painted surface with 80 grit sandpaper.
For old tin or copper copolymers or Teflon-based bottom pants, sand thoroughly with 80 grit sandpaper to remove outer surface.
Wipe clean and apply two coats of Odyssey HD.
Soft, sloughing paint should be removed prior to applying Odyssey HD.
Bare Fiberglass
All bare fiberglass, regardless of age, should be thoroughly cleaned with 92 Bio-Blue Hull Surface Prep or dewaxed several times with D-95 Dewaxer. Then proceed with one of the systems below:
Sanding Method:
Sand hull thoroughly with 80 grit sandpaper to a dull, frosty finish and rewash with 120 Brushing Thinner.
Apply two coats of Odyssey HD.
Non-Sanding Method:
Thoroughly clean, dewax surface with 92 Bio-Blue Surface Prep using a course nylon scuff pad.
Rinse all residue from surface and let dry.
Apply one coat of Pettit Protect Epoxy Primer 4700/4701 following primer label instructions.
Apply two coats of Odyssey HD.
Barrier Coat
Prepare the fiberglass surface as mentioned above (sanding method).
Apply two - three coats of Pettit Protect Epoxy Primer per label instructions.
Apply two coats of Odyssey HD.
Bare Wood
Sand thoroughly with 80 grit sandpaper and wipe clean.
Apply a coat of 6627 Tie-Coat Primer thinned 25% with 97 Epoxy Thinner directly to bare wood.
Allow drying for 4 hours then apply two un-thinned coats of Odyssey HD.
Previously Painted Wood
Thoroughly sand existing hard antifouling paint
If priming is necessary on bare wood spots, apply a touch-up coat of 6627 Tie-Coat Primer thinned 25% with Epoxy thinner.
Apply coats of Odyssey HD.
Steel Hulls
Clean surface to remove grease and dirt.
Remove loose rust and scale from the metal surface by scraping or sandblasting.
Blow off residue then apply one or two coats of Pettit 6980 Rustlok Primer.
Follow with two coats of Pettit 4700/4701 Epoxy Primer.
Follow with Odyssey HD.
Do not use Pettit Odyssey HD on aluminum hulls and outdrives.
Click to Download Pettit Odyssey HD Bottom Paint Application Instructions
About Us
Wholesale Marine is an on line boating store founded to provide customers an easy way find top-quality products at the lowest prices. With associates who possess decades of combined boating experience, Wholesale Marine can truly provide expert customer service.
Shipping Method
Wholesale Marine currently ships all merchandise UPS or truck freight. All orders with in-stock items placed by 2:00 PM EST Monday - Friday are shipped that same day. Orders placed after 2:00 PM on Friday and orders place on Saturday and Sunday will ship on the following Monday. Orders that qualifying for free shipping may be shipped  any method and carrier chosen by Wholesale Marine.  Free shipping offers are only valid within the continental U.S.
There are certain items that we cannot ship outside of the Continental United States. Items that cannot be shipped outside of the Continental United States include all name brand watersports products and hazardous materials, such as but not limited to paint, oil, resins and adhesives.
*Canadian Customers: Please be aware that any brokerage, duty, or customs fees are out of our control.
Returns
Wholesale Marine will gladly refund almost any merchandise within 30 days from original purchase date. To return just send merchandise prepaid, in its original unused condition. Please include a copy of original Wholesale Marine invoice. We will then refund the merchandise amount by the original payment method. Shipping costs are not refundable. No returns for special order items, electronics, cut lengths of material or hazardous materials, such as but not limited to paint, oil, resins and adhesives.
Please ship all Returns to:
Wholesale Marine
147 Circle Freeway Drive
Cincinnati, OH 45246
Connect with Us
Find us on:
Powered by SixBit's eCommerce Solution