TOPCOAT POLYWASH 16oz Bottle Commercial Grade Car wash Technology New With Spray

Description

TOPCOAT POLYWASH 16oz Bottle Commercial Grade Car wash Technology New With Spray.
TOPCOAT POLYWASH
FAST SHIPPING!
LISTING IS FOR 1 BOTTLE 16oz OF TOPCOAT POLYWASH
TopCoat® PolyWash™ brings commercial-grade car wash technology to your driveway!
Water-based formula, Eco Safe!
No solvents or abrasive compounds
Perfect surface prep for TopCoat® F11®
Micro-Bond™ coating leaves behind a water-repellent, protective shine
SAFE FOR YOUR VEHICLE AND THE ENVIRONMENT
Since TopCoat® products are water-based (rather than chemical-based), it is safe to use in your driveway and around your children and pets. And unlike some other products, there is no runoff that risks polluting the environment.
A LITTLE GOES A LONG WAY
You can use as little as 1oz per gallon of water for a regular wash, or 2oz if things are a little dirtier than usual. This means up to 16 washes per bottle!
WORKS PERFECTLY WITH OTHER TOPCOAT® PRODUCTS
All TopCoat® products are specially formulated to be used together. PolyWash™ is the perfect surface preparation for a coat of F11®, HPS™ or Spritz™ for an even longer-lasting shine.
COMMERCIAL-GRADE MICRO-BOND™ TECHNOLOGY
Our proprietary Micro-Bond™ technology means that PolyWash™ doesn’t just clean your car, but also gives it a sleek, water-repellent shine that also protects your finish.
SAFELY AND EFFECTIVELY REMOVE ROAD DIRT AND GRIME
PolyWash™ makes quick work of dirt and debris that other washes and waxes have trouble with. And unlike traditional wash products, PolyWash™ won’t create spiderwebs in your finish.
SIMPLE TO USE
Use PolyWash™ in a bucket, sprayer, or foam cannon. However you decide to use it, it’s simple to apply, cleans fast and easily towels dry for a streak-free shine.
Safe for your finish: Unlike traditional soaps and washes, PolyWash™ will break up dirt and grime without damaging the surface. Perfect surface prep for F11®: PolyWash™ is specially formulated to bond with all TopCoat® Sealers.
A little goes a long way: Our ultra-concentrated formula means you can use as little as 1oz per gallon of water! Our high-tech Micro-Bond™ coating leaves behind a water-repellent, protective shine.
Use it in a sprayer, foam cannon, or the traditional bucket-- And get the same great results with whatever method you prefer! Wash, clean, shine, and protect with this one revolutionary product!
For General Purpose Cleaning:
Use 2oz of PolyWash™ per gallon of water. For light cleaning use 1oz of PolyWash™ per gallon.
Pour PolyWash™ into a bucket, then add water using the suggested ratio.
Thoroughly wet the vehicle you intend to wash.
Apply the mixed PolyWash™ to the wet surface using a sponge or wash mitt, wiping and washing the surface as you go.
Rinse thoroughly and then dry after.
Spray Directions:
Pour 1/2oz of PolyWash™ into a 32oz spray bottle already filled with water, then shake.
Spray on surface and wipe off using clean microfiber towels a section at a time.
Do not allow to dry before wiping clean.
For More Aggressive Cleaning:
Spray PolyWash™ on a section at a time.
Agitate surface with a cellulose sponge, microfiber wash mitt, or microfiber applicator pad.
Then wipe off using a clean microfiber towel until dry.
Foam Canon Directions:
Leave enough room to pour 1-2oz of PolyWash™ in a water filled foam canon container.
Note: For more desired sudsing/foaming add extra PolyWash™.
Connect foam cannon container to foam spray-head then shake to mix.
Attach to hose and go!
Rinse thoroughly and towel dry or blow off water.
Q. How much surface area does one bottle cover?
A. 1oz of PolyWash™ should cover approximately 440sqft of surface area. That means that a bottle will cover 7040sqft. To make this a little more practical, we recommend using 1oz in a gallon of water for a regular washing of your car, or 2oz in a gallon if it is particularly dirty.
Q. Will this remove wax? Will this clean off water spots?
A. PolyWash™ will not remove wax, and because it helps prep the surface to bond with our other products, it is the perfect product to use before applying a coat of F11®. PolyWash™ will not remove water spots, but due to the nature of the coating it applies, will significantly reduce the amount of new water spots that are able to form on the surface.
This bottle says 6/21/2018